The semiautomatic machine is manufactured according to the performance specification approved by the Buyer. The semiautomatic machine is designed for grinding of external helical surfaces of the work pieces by single-rib grinding wheel with coolant-cutting fluid. Abrasive aluminum oxide wheels which can be profiled directly on the semiautomatic machine are used as grinding wheels.

The semiautomatic machine is made in the horisontal format. The base is the foundation, on which main assembly units of the semiautomatic machine are mounted. In the front part of the base there is a table movable in the longitudinal direction (X-axis), on which workpiece headstock (А-axis) with blank to be machined, tailstock and dressing mechanism for grinding wheel are mounted. In the back part of the base there is a cross carriage (Z-axis), on which swing reducer for wheelhead is mounted (C-axis). Working area is fully covered by a cabinet-type guard, with sliding and assembled doors.

*Specified at a stage of coordination of the specification

The warranty period of operation of a semiautomatic device makes 12 months from the date of its commisioning according to the Act on input of a semiautomatic device in commercial operation, but no later than three months of the delivery date and on condition of carrying out balancing and commissioning by experts of the Seller. Guarantee certificates extend to production acquired directly from the Seller or through official commercial agents and dealers of the Seller.

The seller renders additional services in carrying out balancing and commissioning, development of the steering programs for processing of other types of products. Guarantee certificates extend to all types of the additional services rendered by the Seller, his official commercial agents and dealers. Conditions of providing the above-stated services make a reservation the separate contract.

Download the techno-commercial offer (specimen, PDF)
The parameters marked with (*) are specified at the stage of the technical task coordination.
Product Indicators, machined:
Dimensions of the installed grinding wheel: max. length, mm 1700
max. diameter, mm 350
min. diameter, mm 3
max. weight of processed details, kg 200
Size of the blank to be installed length, mm 1800
diameter, mm 350
Parameters of working and adjustment travels:
Max. working travels along controlled coordinate axes: longitudinal, mm: 2000
transverse, mm: 320
the headstock, deg. : not limited
wheelhead, deg : ±30


axis Х, mm: 2000
axis Z, mm: 320
axis, deg.: not limited
axis, deg.: ±30
Number of controlled axes 4
Performance tool that is installed on the machine:
Dimensions of the installed grinding wheel: max. diameter, mm 400*

min. diameter, mm 300*

the frequency of rotation of the grinding wheel, min-1 1500...2800*
Dimensions of the installed ruling circle, mm max. diameter, mm 125
frequency of rotating diamond roller min-1 1500...3000
Indicators of primary and secondary movements:
Discreteness of travel assignments along coordinate axes linear, mm: 0,0001
circular, deg.: 0,0001
Max. speed of working unit travels longitudinal m/min 10
transverse , m/min 10
headstock, rpm 0…120
wheelhead, rpm 2
Indicators Power of machine:
Power of the main motion motor, kW 10,0
Parameters of accuracy and roughness:
Аccuracy and roughness of samples machining Roughness of the spline machined surface Ra 0,80
Electrical equipment specifications
AC current frequency, Hz 50
Nature of supply AC. 3-phase
Voltage, V 380
Dimensional characteristics:
Dimensions (LxWxH) mm 5310х4500х2650*
Weight, kg 7050*

Write a review

Note: HTML is not translated!
    Bad           Good
basic_captcha

Semiautomatic CNC thread-grinding machine VZ-681F4-02

  • Product Code: VZ-681F4-02
  • Availability: Pre-Order

Tools made on the machine

  • Threaded part
  • Taps