The machine is designed for grinding on the details of splines of straight and involute profiles.Spline grinding is performed with the use of cutting fluid, abrasive grinding wheels directly edit on the machine.
 The technical capabilities of the machine enable to perform with the use of additional options operations of grinding of indexing plate slots, spur gears and other similar operations. The CNC SINUMERIK 840D DSL device (Germany) complete with digital drives of the coordinate axes ensures high-quality machine control and its reliable, smooth operation.
Grinding of the surfaces on the machine is carried out by the control program.

As drives on the machine applied linear synchronous motors, synchronous motors, synchronous circular (torus) motor, backlash-free ballscrew drives. Axis is along closed preload guideways.
This equipment is also equipped with a system of orientation that binds the workpiece (angular and axial) to the machine coordinate system and allows to evaluate the quality of the workpiece, stepping on the ground and quality of the finished part.

The parameters marked with (*) are specified at the stage of the technical task coordination.
Product Indicators, machined:
Dimensions of the installed grinding wheel: Max. length, mm 1700
Max. diameter, mm 200
Min. diameter, mm 10
Max. module / slot height, mm 1…8/2…20
Max. weight of the work piece to be machined, kg 200
Size of the blank to be installed Length, mm: 1800
Diameter, mm: 250
Parameters of working and adjustment travels:
Max. working travels along controlled coordinate axes: longitudinal, mm 2000
transverse, mm 300
vertical, mm 300
the headstock, deg. unlimited
Number of controlled axes 4
Performance tool that is installed on the machine:
Dimensions of the installed grinding wheel: Max. diameter, mm: 200
Min. diameter, mm: 70
The frequency of rotation of the grinding wheel, min-1: 4000...8000
Number of controlled axes 4
Indicators of primary and secondary movements:
Discreteness of travel assignments along coordinate axes Linear, mm 0,001

Circular, deg. 0,001

Roughness of the spline machined surface Ra 0,80
Max. speed of working unit travels longitudinal, m/min 10
transverse, m/min 5
vertical, m/min 5
headstock, rpm 30
Indicators Power of machine:
Power of the main motion motor, kW 11,5
Electrical equipment specifications
AC current frequency, Hz 50
Nature of supply AC. 3-phase
Voltage, V 380
Dimensional characteristics:
Dimensions (LxWxH) mm 5310х4500х2650*
Weight, kg 7050*

Write a review

Note: HTML is not translated!
    Bad           Good

The CNC Spline-Grinding Machine VZ-729F4-02

  • Product Code: VZ-729F4-02
  • Availability: Pre-Order


Информация размещённая на сайте не является публичной офертой и носит информационный характер для ознакомления с выпускаемой продукцией