• Semiautomatic machine with CNC for broaches VZ-780F4-02

The semiautomatic machine is designed for sharpening, profile formation and chip grooves on both flat and round broaches. Surface broaches can be made of abrasive or grinding wheels depending on ongoing operations. To ensure high quality indicators of the processed surfaces of the cylindrical grinding is performed wet. Design features of the machine in conjunction with software allow you to perform the following technological transitions:

- binding of the treated feed to the machine coordinate system of the machine;

- binding of the grinding wheel to machine the coordinate system of the machine;

the fancy dressing of the grinding wheel;

- formation of the chip grooves on both flat and round broaches;

- formation of the profile on round and flat broaches;

- sharpening of the front surfaces round and flat broaches;

- sharpening of the rear flat surfaces of the broaches. Surface treatment is carried out grinding wheels of different profiles, manually replacing them on the machine.

The application on the machine open programming G-code (ISO 7 bit) allows the user to handle products use control program of its own design or control software, generated software – PPS system (preparation of control programs), OJSC VIZAS Works.  

Warranty period of operation of the semiautomatic machine is 12 months from the date of its commissioning under the Act to enter a machine in an industrial operation, but not later than three months from the delivery date and subject of commissioning professionals of the Seller. The warranty covers products purchased directly from Seller or through the official commercial agents and dealers.

The seller renders additional services on carrying out of starting-up and adjustment works, developing of control programs for processing other types of articles. The warranty covers all kinds of additional services rendered by the Seller, its official commercial agents and dealers. The conditions of providing the above services are stipulated in the individual contract.Service centers in the Republic of Belarus:OJSC VIZAS Works: Vitebsk, Frunze Avenue, 83, OOO "Sitek Komplekt", Minsk, Nekrasova str., 114,room No. 32, L. AND 5-7/BL, office 5




The parameters marked with (*) are specified at the stage of the technical task coordination.
Product Indicators, machined:
Dimensions of the installed grinding wheel: max. length, mm 1700
max. diameter, mm 200
min. diameter, mm 10
max. weight of processed details, kg 200
Size of the blank to be installed length, mm 1800
diameter, mm 250
Parameters of working and adjustment travels:
Max. working travels along controlled coordinate axes: longitudinal, mm: 2000
vertical, mm: 320
transverse, mm: 320
the headstock, grad.: not limited
wheelhead degrees.: +90
Performance tool that is installed on the machine:
Dimensions of the installed grinding wheel: max. diameter, mm 150
min. diameter, mm 70
the frequency of rotation of the grinding wheel, min-1 0...24000
Dimensions of the installed ruling circle, mm diameter, mm 125
frequency of rotating diamond roller min-1 1500...3000
number of controlled axes 5
Indicators of primary and secondary movements:
Discreteness of travel assignments along coordinate axes linear, mm 0,001
circular, deg. 0,001
Max. speed of working unit travels longitudinal, m/min: 10
vertical, m/min: 5
transverse, m/min: 5
headstock rpm: 40
wheelhead, rpm: 40
Indicators Power of machine:
Power of the main motion motor, kW 10
Parameters of accuracy and roughness:
Аccuracy and roughness of samples machining Roughness of the processed surface of the slot Ra 0,80
Electrical equipment specifications
AC current frequency, Hz 50
Nature of supply AC. 3-phase
Voltage, V 380
Dimensional characteristics:
Dimensions (LxWxH) mm 5310х4500х2650
Noise level corresponds SanPiN 2.2.4/2.1.8.10-32-2002.
Weight, kg 7050

Write a review

Note: HTML is not translated!
    Bad           Good
basic_captcha

Semiautomatic machine with CNC for broaches VZ-780F4-02

  • Product Code: VZ-780F4-02
  • Availability: Pre-Order