Saw wheels with hard-alloy plates are basic equipment of the woodworking industry.
Immediate sharpening of the saw wheel in case of origin of initial signs of bad operation will spare a lot of time, will reduce financial expenditures, will increase efficiency of work.
Sharpening of saw wheels requires special attention as process of formation of the new cutting edge, is labor-consuming and the long.
For the solution of this problem our enterprise offers the machine tool-grinding for saw wheels with hard-alloy plates of VZ-464. Sharpening is made by a diamond grinding wheel of front and back surfaces of teeths.
The machine of table execution consists of the base mounted in the underpan for collection SOZH and slime. At the left on the base the swinging bracket with a grinding block is set. The grinding block has a possibility of turn around a vertical axis together with a bracket and around a horizontal axis on a bracket. Angles of a turn of a grinding block are set by the appropriate limbs. On the right the block of a product is placed, on a spindle of a block the sharpened saw together with flanges depending on the sizes of a saw is set and is fixed by a bolt with a quick detachable washer. Ahead on a receptacle with the T-shaped notch the brake mechanism for support and braking of a saw when sharpening is set.
On the machine two main operations on sharpening are executed: sharpening on a front surface of a saw and sharpening on a back surface of a saw. The first operation is executed by method of multipass grinding as a result of rotation of a grinding head, manual reciprocal relocation of a grinding head and manual turn of the sharpened saw. The second operation is executed as a result of rotation of a grinding head, manual reciprocal relocation of a grinding head and manual turn of the sharpened saw.
Operation is carried dry with an extension of waste of sharpening by chimney system of a customer of the machine or with the cooling delivered at additional expense. An electric equipment ensures reliable functioning of the machine in case of oscillations of mains voltage from 90% to 110% of a nominal and change of rated frequency of ±2%. Speed and high quality of sharpening – the guarantor of our production.Brief information
|Saw external diameter, mm||100…500|
|Saw bore diameter, mm||20,30,32*,40,50,70,80|
|Min. saw teeth pitch, mm||11,2|
|Range of saw teeth face angles, deg.||-8...+25|
|Range of saw teeth back angles, deg.||15...30|
|Inclination angle of the saw teeth face/clearance against end surface of the saw housing||±15/±45 deg.|
|Dimensions of the grinding wheel 2725-0013 (GOST standard 16175-90), mm:|
|Rotation speed of the grinding wheel, min-1||3000|
|Grinding wheel drive, kW||0,37|
Grinding Machine For Circular Saws With Carbide Composition Plates VZ-464
- Product Code: VZ-464
- Availability: In Stock