On any production which is actively operating the cutting tool the equipment for his sharpening has to be used. The VZ-879-02 grinding grinder which is capable to sharpen the metalwork and metal-cutting tool from solid alloy and tool steel perfectly is suitable for the solution of this task.
The machine has a simple design at the heart of which a squared welded bed with a niche for installation of the electric motor. The grinding grandma is executed in the welded case with steel casings of a protection of grinding wheels 3 mm thick. The spindle which has cones for fastening of mandrels with circles on both parties of the grandma is installed in the grandma's case on rolling bearings. The main spindle is set in motion by means of the belt drive by a maple belt from the AIR90L4 engine with a power of 2200 W. The engine has protection against overloads the thermal relay. Frequency of rotation of a spindle makes 3000 rpm.
In a basic complete set the machine is equipped a heat with branch and a heat - the sucking-away unit. The vacuum cleaner has the welded case to which the electric motor fastens. The case of the vacuum cleaner is closed by a cover with two branch pipes to which are attached sleeve metal from casings of grinding wheels. For collecting dust the filter made of cloth is used.
In addition the machine can be equipped:
- the device for sharpening of circular saws with a diameter up to 250 mm (VZ-367.P1);
- the device for sharpening of spiral drills with a conic and cylindrical shaft (VZ-367.P2);
- the device for sharpening of sawing frames (VZ-367.P3).
|Distance from the unit base to the wheelhead spindle axis, mm||1010|
|Spindle rotation speed, min-1||3000|
|Max. size of the installed grinding wheels, mm:|
|Main motion drive, kW||1,5|
Cutting Tool Grinding Unit VZ-879-02
- Product Code: VZ-879-02
- Availability: In Stock