The machine tool tape joiner VZ-357 is designed for rectilinear and curved cutting of band saws of wood products, as well as for flat grinding of parts and grinding corners.

The machine consists of a C-shaped rack, which is made in the form of a welded frame, divided into three niches. In the lower part is the electrical equipment. In the upper part there is a driven pulley, a guiding device and a mechanism for fixing a ragged saw. In the middle niche there is a leading pulley, the end of which serves as a grinding wheel. On the door of the middle niche, a rotary table is mounted, allowing grinding of parts at an angle of up to 45 °. As a cutting tool, a bimetallic band saw is welded into a ring and stretched on pulleys in the upper and middle niche.

The table for sawing is a cast iron cast, half-cut by a groove for a saw. For straight cutting on the table, the guide ruler is installed and securely fixed at a distance equal to the width of the sawed part.

To perform sawing of other types, the machine is equipped with special tools:

  • adjustable stop for cutting parts along the circumference;
  • adjustable stop for cutting to a certain depth;
  • swivel stop for transverse rectilinear cutting at an angle.

The machine is designed with interlocks preventing the engine from starting when the fence door is open and the casing is removed, and when there is no saw band or when it is not stretched. Starting the engine will also be impossible if the machine is not connected to the dust extraction system.

Currently, the machine is not supplied, but we will try to pick up an analog for you.

Technical description
The parameters marked with (*) are specified at the stage of the technical task coordination.
Diameter of sawing pulleys, mm400
Max band saw width, mm20
Band saw speed, m/sec30
Max height of the sawcut, mm200
Saw overhang from machine base, mm380
Table dimensions, mm500х500
Max swiveling angle of the table regarding sawcut plane, deg.45
Sanding disc diameter, mm300
Sanding disk, min-11400
Max swiveling angle of the table regarding sanding disk plane, deg.45
Drive power, kW3
Machine overall dimensions (LxWxH), mm980х500х1900
Machine weight, kg360

Write a review

Note: HTML is not translated!
    Bad           Good

Band Sawing Machine VZ-357

  • Product Code: VZ-357
  • Availability: In Stock

Информация размещённая на сайте не является публичной офертой и носит информационный характер для ознакомления с выпускаемой продукцией