The tailstock with adjustable height of the centers 3E642E.P31 is designed to support the tail part of the conical tool when sharpening it on the front surface. The headstock is mounted on the table of the universal grinding machine with the help of this tool it is possible to sharpen various kinds of metal-cutting tools.

The headstock body is mounted on a special bracket with the ability to turn in a vertical plane and move up and down the vertical plane of the bracket. The body position is fixed with a nut and screws.

When grinding a cone tool, you need a center with a body, turn it by the amount of the angle of the tool's tooth and fix it with screws. Then press off the center height adjustment nut, set the center to the desired height and tighten the nut. To quickly install the center on the center line of other devices (height above the table 125mm) use the risks on the bracket and the moving part. By aligning them, tighten the center height adjustment nut.

The parameters marked with (*) are specified at the stage of the technical task coordination.
The inner cone of the quill GOST 25557-82
Morse 2
Quill travel, mm  20
 Vertical displacement of the center, mm :
above the line of centers 70
below the line of centers 55
Angle of inclination of the spindle axis from zero degr.  
Overall dimensions (LxWxH), mm 235×225×270
Weight, kg 14,0

Write a review

Note: HTML is not translated!
    Bad           Good

Backstay with adjustable height of centers 3E642E.P31

  • Product Code: 3E642E.P31
  • Availability: In Stock

Информация размещённая на сайте не является публичной офертой и носит информационный характер для ознакомления с выпускаемой продукцией