The device is intended for cylindrical sharpening of right-hand spiral drills with a cylindrical shank, as well as drills with a conical shank with a length of a cylindrical part of not less than 110 mm on the machines of the mod. 10MA411, VZ-367, VZ-879-02.

The device is fixed to the base of the machine. VZ-367 or mod. 10MA411, mod. VZ-879-02. (Instead of the right hand pod, the fixing bolts of the pod are fixed to the base of the machines).

To the plate 1, with a possibility of linear movement along the grooves, a plate 2 is fixed, rigidly connected to the guide 3, through which, by means of the screw 4 from the button 5, the carriage 6 is movable. On the carriage there is mounted a bracket 7 carrying the axis 8, which can be mounted on one from the two apertures, a prism 9 rigidly lubricated through two rollers 10 with a film 11. A prism 13 can be moved along the rollers 10 through a screw 12, which also has two holes for mounting on the axis 8.

The parameters marked with (*) are specified at the stage of the technical task coordination.
Diameter, mm
Angle in terms of sharpened drill, deg.
Range of rear corners, deg.
Overall dimensions (LxWxH), mm
Weight, kg

Write a review

Note: HTML is not translated!
    Bad           Good

The device VZ-367.P2

  • Product Code: VZ-367.P2
  • Availability: In Stock

Информация размещённая на сайте не является публичной офертой и носит информационный характер для ознакомления с выпускаемой продукцией