It is designed to support the center tool when it is sharpened on the working mandrel.

In the case 1 of the headstock, there is a pinot 2 with a conical hole for exchangeable centers. The rack on the outer surface of the quill is meshed with a gear wheel on the axis of which the handle 5 is mounted. Turning the handle 5 of the pinol 2 with the center 3 moves along its axis, which makes it easy to change the product in operation. The center 3 is pushed out of the quill 2 by the clamping ram 6.

In the process of operation, it is necessary to lubricate the quill with a grease gun 7, installed on the headstock body, once a shift. Replacement centers are available for a fee.

Back end head. Adaptation VZ-318.P3

The parameters marked with (*) are specified at the stage of the technical task coordination.
Наибольший диаметр изделия у заднего центра, мм 250
Наибольшая длинна изделия на станке:  
с передней бабкой ВЗ-318.П2 500
с передней бабкой с большим вылетом 3Е642.П73 850
Внутренний конус пиноли ГОСТ 25557-82 Морзе 2АТ7
Ход пиноли, мм 20
Габаритные размеры (ДхШхВ), мм 250×250×230
Масса, кг 7,6

Write a review

Note: HTML is not translated!
    Bad           Good
basic_captcha

Back end head. Adaptation VZ-318.P2

  • Product Code: VZ-318.P3
  • Availability: In Stock